Knife “Ragnvaldur the Traveller”
Decorative seax with leather scabbard
For some reasons this item is not available at the moment. Please contact our support at firstname.lastname@example.org for more detailed information or check these categories for similar items:
“Ragnvaldur the Traveller” etched decorative knife with scabbard
Stainless steel viking seax with leather scabbard
Made to resemble a 9-10th century seax, this knife is a great addition to any viking garb. This seax is made from 1.5mm stainless steel and is hollow, leaving it much lighter than your average seax. Because it is made to be decorative, the blade on this seax is blunted and not dangerous at all, making it excellent for photoshoots or just as a display piece on your wall or belt. The blade meets the hilt with a shaped brass ring, which extends down into a comfortable leather wrapped handle. It is finished off with another piece of brass, tying the whole thing together and making for a very handsome knife!
This blade of this knife is etched with viking knotwork, in a special pattern designed by our research team exclusively for ArmStreet. Because it is made from stainless steel, you don’t have to worry about the blade rusting or becoming less shiny - just wipe it down with a dry cloth after exposure to moisture and it should remain lustrous and beautiful.
The sheath is moulded to specifically for this knife, meaning it all fits together flawlessly. It is constructed from quality leather and includes sharp, deep embossing that visually stands out. The embossing mimics that of the etching on the knife: viking knotwork. The scabbard is completely hand sewn with exposed stitching.
The sheath can be attached to your belt via two brass loops made from the twisted wire attached to leather. Simply remove your belt, loop the sheath through and adjust it to where you would prefer it to sit.
Important note: this seax is intended to be used purely as a decorative item, and is not meant to be used as a weapon. The “edge” of the blade is blunted and cannot be sharpened, and it is constructed to be hollow. It should not be swung near children, other people or objects that it may harm, and by buying this seax you are taking any and all responsibility for anyone you may injure.
Please contact us if you have any additional questions.
- Length in sheath: 37 cm (14 9/16'');
- Length without sheath: 36.3 cm (14 5/16'');
- Length of the blade 24.1 cm (9 1/2'');
- Width in sheath: 4.8 cm (1 7/8'');
- Width of the blade: 3 cm (1 3/16'');
- Thickness of the spine: 0.6 cm (1/4'').
- Scabbard fits perfectly and is made specifically for the seax;
- Twisted brass loops;
- Attaches to most belts;
- Decorative etching;
- Matching scabbard embossing;
- Light and durable;
- Rust resistant stainless steel.
- Stainless steel;
- Natural leather.
This item is part of the “Viking” collectionView collection